Why the Quote Never Answers the Container Question
A supplier quotes 2,000 cartons of perforated hanger strap, the forwarder asks whether to book a 20ft or a 40ft, and the purchasing manager has to answer a question nobody in the chain has actually calculated. The instinct is to book the 40ft because it is "twice the container". For steel strap, that instinct is usually wrong, and an incorrect booking can increase freight or handling costs.
This guide is for importers, wholesalers and purchasing managers who have to commit to a container size before the goods exist. It sets out the arithmetic that decides the answer, using the packing data published on our specification page, and it explains which numbers on a supplier's quote you should treat as estimates rather than facts.
Where This Fits in the Buying Sequence
Container planning is the last of four decisions, and it inherits the mistakes of the first three:
1. Specification – width, gauge, hole diameter and pitch, roll length, finish. These are covered in the perforated hanger strap specifications guide. 2. Selling format – retail roll with a sleeve, bulk coil, dispenser box. This changes the carton, and the carton is what fills the container. 3. Packing – rolls per carton, carton dimensions, carton gross weight. This is a starting point for a safe loading plan. 4. Container plan – how many cartons, which size of box, and whether the limit you hit is volume or weight.
A buyer who starts at step four with a target roll count and no carton data is guessing. Verified packing data gives the forwarder a starting point for a practical loading plan.
Start with Verified Packing Data
Ask the supplier for the SKU, rolls per carton, measured gross carton weight and the external carton dimensions with units. On our specification page, item G072534 is listed as a 3/4 in × 25 ft, 24 gauge roll, with 20 rolls and 11.76 kg shipping weight per carton. Item G0710034 is listed as a 3/4 in × 100 ft roll, with 12 rolls and 27.62 kg per carton. These are published figures; confirm the latest packing specification for your order before booking.
For G072534, the factory-confirmed carton dimensions are 44.5 × 14.5 × 16.5 cm (445 × 145 × 165 mm), with 20 rolls and 11.76 kg gross per carton. confirm current measurements and units for every SKU before booking. Include the final carton and any protective packaging in those measurements.
Estimate by Weight and Volume Separately
First agree the maximum cargo weight for the actual container and complete route with the carrier and forwarder. Subtract the weight of pallets, dunnage and securing materials from that allowance. Divide the remaining allowable carton weight by the verified gross weight of one carton and round down. For a mixed order, calculate each SKU separately.
Separately, multiply the verified external dimensions of each carton in metres to obtain its volume. Compare the total with usable container space. This is an initial estimate: carton orientation, pallet footprint, stacking strength, door clearance, weight distribution and securing can all reduce the number that fits.
The lower of the weight-based and space-based estimates is only a starting point. A qualified packer and the carrier should confirm the practical loading plan, floor loading, centre of gravity, applicable road limits and safe securing before shipment. The IMO/ILO/UNECE CTU Code provides guidance for packing cargo transport units.
A Weight-Limited Illustration
Suppose the forwarder confirms that 20,000 kg is available for cartons after accounting for pallets and other packing materials. Using the published 11.76 kg gross weight for G072534, arithmetic gives a maximum of 1,700 complete cartons by weight (34,000 rolls). This is a hypothetical calculation, not a promised load or recommendation for a particular shipment. Actual measured weight, the available space and the approved loading plan can reduce that quantity.
For the 100 ft SKU G0710034, 20,000 kg divided by 27.62 kg per carton gives 724 complete cartons, or 8,688 rolls, by weight alone. These two examples use different roll lengths and cartons; do not compare the carton counts as if they describe the same product.
Choosing Between a 20 ft and a 40 ft Container
Do not assume a 40 ft container can carry twice the cargo weight of a 20 ft container. Request the actual internal dimensions, tare, maximum gross mass and permitted payload of the container being offered. Containers and equipment vary. Then ask your forwarder for the road, rail and port limits that apply to the complete route.
Compare total delivered freight per roll or per kilogram using the number of rolls that can actually be loaded under both weight and space constraints. Include inland transport, handling, pallet requirements and any heavy-container charges. A larger container may be worthwhile when its rate or mixed cargo makes the total cost favorable; confirm the result for the actual booking.
The IMO explanation of verified gross mass explains the shipper's responsibility for communicating VGM and the two approved verification methods. Follow the requirements that apply to the route and carrier.
Inspect the Goods Before Loading
Use a calibrated scale to check representative cartons against the agreed packing specification. Record the sample selection, actual gross weights and carton counts. Weighing is a useful reason to investigate discrepancies, but weight alone cannot prove both strip thickness and roll length: different deviations can offset one another.
Independently measure thickness and roll length using an agreed sampling and measurement method. Confirm width, hole pattern, finish and packaging against the approved sample or purchase order. Ask the manufacturer about any variation before booking or loading; do not infer the cause from weight alone.
A Loading Plan to Attach to the Purchase Order
The loading plan belongs in the PO, not in an email thread. It should state, for each SKU:
- Item number, width, gauge in millimetres, roll length, finish, and rolls per carton.
- Carton dimensions and gross weight, in metric, with the measurement basis stated.
- Cartons per pallet, pallet dimensions, and maximum stack height – including whether pallets may be double-stacked.
- Mixed-SKU rules: which SKUs may share a pallet, and whether cartons may be mixed within a pallet layer.
- Moisture protection: stretch wrap, desiccant or VCI where the route crosses climates, and edge protection on the carton corners.
- Loading evidence: photographs of each layer, the container number, the seal number and the VGM declaration.
- A packing list by carton count, not by roll count, so the receiving team can count what is physically there.
For the packaging side of the same decision, the perforated hanger strap packaging checklist covers how the pack should be specified and approved before the carton dimensions are fixed.

Questions Buyers Ask
How many rolls fit in a 20 ft container? There is no reliable universal number. Confirm the roll count and gross weight per carton, measured dimensions, actual container payload and route limits, then have the proposed loading plan checked. The illustrations above are weight-only examples, not shipping guarantees.
Is a 40 ft container always cheaper per roll? No. Compare full delivered transport costs against the quantity that can actually be carried. Container payload, road limits, available space and handling charges all matter.
Can cartons of different SKUs be shipped together? Often they can, provided the packer has an approved plan for weight distribution, securing, carton strength and identification. Calculate the weight and volume of each SKU separately.
Can carton weight confirm gauge and roll length? No. Use weight as a cross-check, then verify thickness, length and count separately against the agreed specification.
What should an importer request before booking? Request current carton count, measured external dimensions and units, gross weight, pallet details, stacking limits, route restrictions and a proposed loading plan. Agree who will provide the required shipment documents.
